Date: Thu, 14 Sep 2016 09:07:01 -0600 From: Keiji YOSHIMURA yosimura [at] solar.physics.montana.edu Reply-To: xrt_co@solar.isas.jaxa.jp To: "xrt_co@solar.isas.jaxa.jp Observer" Subject: [xrt_co:29607] Focus Recal failure (xrt_co:) A "focus recal" should have been performed at 2:00UT, on 2016/09/13, which was in the timeline uploaded 2016/09/10. But it did not happen. (See the attached ODO_FOCUS plot.) I've checked "XRT_OGLIST" which appear in the exported_plan PDF files (also can be found at the directories under /home/flare/slb/cp/cpt/output/ on ISAS machines), and noticed that the current one was listed as: XRT_FOCUS_RECALIBRATE_416_OG [0x1a0] while the others (2015/06/06-2016/08/29) were: XRT_FOCUS_RECALIBRATE_445_OG [0x1bd] I have no idea why the difference happened or if it caused the problem. Any thought? Below I put the excerpts from the XRT_OGLIST of 2016/09/10 and 2016/08/27 timelines for your reference. exported_plan_20160910.pdf: (/home/flare/slb/cp/cpt/output/0167/XRT_OGLIST_0167.chk) |2016/09/13 02:00:00.0 XRT_CTRL_MANU_409_OG [0x199] | MDP_XRT_CTRL_MANU 1 07-F0 c1 |2016/09/13 02:00:10.0 XRT_FOCUS_RECALIBRATE_416_OG [0x1a0] | XRT_FOCUS_RECAL 2 07-F8 78 00 |2016/09/13 02:04:10.0 XRT_FOCUS_POSITION_410_OG [0x19a] | XRT_FOCUS_POSITION 4 07-F8 22 fe 97 00 exported_plan_20160827.pdf: (/home/flare/slb/cp/cpt/output/0135/XRT_OGLIST_0135.chk) |2016/08/29 05:40:56.0 XRT_CTRL_MANU_402_OG [0x192] | MDP_XRT_CTRL_MANU 1 07-F0 c1 |2016/08/29 05:40:58.0 XRT_FOCUS_RECALIBRATE_445_OG [0x1bd] | XRT_FOCUS_RECAL 2 07-F8 78 00 |2016/08/29 05:41:00.0 AOCS_ORe-point_Start_5_OG [0x09b] | AOCU_NM 5 02-76 03 00 00 00 00 |2016/08/29 05:44:58.0 XRT_FOCUS_POSITION_410_OG [0x19a] | XRT_FOCUS_POSITION 4 07-F8 22 fe 97 00 Keiji (on XRT_DV duty) &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Keiji Yoshimura (yosimura [at] solar.physics.montana.edu) Physics Department, Montana State University &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&